Purasolve Paint Equipment Cleaner

SKU: ESPEC Category:

Paint Operations Equipment Clean-Up Solvent

  • High-Tech Paint Equipment Cleaning Compound
  • Fully Recyclable (up to 100 times)
  • Non-Hazardous
  • Developed to Replace Dangerous Solvents for Paint & Resin Clean-Up
  • Low Odour
  • Improves Worker Health & Safety
  • Reduced Disposal Costs
  • Slow Evaporating
  • Does not Dry Out Seals and Hoses
  • Safe to Use, Store and Dispose of
  • Reduced PPE Requirement

 Purasolve Paint Equipment Cleaner is a unique but powerful cleaning compound, that replaces MEK, Toluene blends, Acetone, Xylene and other dangerous solvents for resin and paint equipment clean-up.



Purasolve Paint Equipment Cleaner is used for:

  • Resin and paint equipment cleanup
  • Replaces MEK, Toluene, Acetone & Xylene
  • Recycled paint clean-up washers

Method of Application:

Purasolve Paint Equipment Cleaner is used neat.

Spray Purasolve Paint Equipment Cleaner though the pump and paint gun, capturing the rinse solution until solution is clear.

Prior to reusing equipment, it is of utmost importance that the painter do a 5 second ‘pattern check’ spray, to ensure that all the Purasolve Paint Equipment Cleaner is out of the pump equipment & gunhead.

It is recommended that the rinse solution be filtered through the Purasolve Reclamation System for extended re-use of the cleaning product.


Drain all paint out of the cup, set up a “gross cleaning station” with Purasolve Paint Equipment Cleaner (sufficient amount to submerge equipment) clean cup and head as if with thinner.  You may then use a gun cleaner for final cleaning.  Alternately, you may use a detail cleaning method with a separate tank or bucket with Purasolve Paint Equipment Cleaner.  You must hand detail and rag dry the exterior of the gun head and take-up tube, and inside and outside of the cup. The Purasolve Paint Equipment Cleaner will not evaporate on its own. When the next charge of paint is put into the cup and sprayed, a 2 second “pattern check spray” will remove anyPurasolve Paint Equipment Cleaner from the barrel of the gun. THIS IS AN ABSOLUTE MUST.


Drain all excess paint, and place 7-10 Litres of Purasolve Paint Equipment Cleaner in the pot and close. Pressurize and spray out paint into waste paint container. The painter will feel when Purasolve Paint Equipment Cleaner is flowing through the line. Spray Purasolve Paint Equipment Cleaner into SEPARATE container until lines flow clean (visual). When this is completed, open the pot and rag dry the top of the pressure lid, and the inside of the pot. The Purasolve Paint Equipment Cleaner will remain in the lines, and prevent any paint from building up in the lines. It is recommended to begin using Purasolve Paint Equipment Cleanerwith fresh lines when using pressure pots or airless systems. The Purasolve Paint Equipment Cleaner will clean the old paint from within the lines, and in extreme cases cause clogs at the gun tip from the old paint. Purasolve Paint Equipment Cleaner will prevent any old paint from building up in a line, forever. Save the usedPurasolve Paint Equipment Cleaner in the catch bucket and settle the paint out overnight. Pour the Purasolve Paint Equipment Cleaner out of the bucket, and dispose of the paint on the bottom of the bucket. This is your only waste. It is possible to further extend the life of the Purasolve Paint Equipment Cleaner by filtering the settled material. When the pot is recharged, let the paint push thePurasolve Paint Equipment Cleaner out into the “save” bucket, and do a pattern check when the paint begins to spray. It is important to spray out all of thePurasolve Paint Equipment Cleaner from the line before painting. This should be about 5 seconds per 50 feet of line.


Wipe the take-up hose with a rag dampened with Purasolve Paint Equipment Cleaner. Place hose in 20 Litre bucket of Purasolve Paint Equipment Cleaner and start spraying paint into waste paint container. This will allow the Purasolve Paint Equipment Cleaner to push the paint out of the line. When the Purasolve Paint Equipment Cleaner reaches the spray head, begin spraying into the “saving” bucket. Do this until the spray is clean of paint(visual). When new paint is connected to the take-up hose, begin spraying the Purasolve Paint Equipment Cleaner into the “save” bucket until the painter feels the paint hit the tip. Spray a pattern check spray, and begin painting. Save the Purasolve Paint Equipment Cleaner as above. Since the Purasolve Paint Equipment Cleaner does not mix with the paint, it will clean even when tinted from repeat use. It is possible to clean red paint or primer with black Purasolve Paint Equipment Cleaner and charge with white paint, and see no effect on the colour of the paint sprayed.

Please note: This product is not a paint thinner.
The product is for paint equipment clean-up only.
It must not be used as a surface preparation solution or as a thinner for paint & coatings.

Improves Business

Better Results, Safer Assets, Lower Cost

Effective & Cost Saving

Purasolve Paint Equipment Cleaner is slow evaporating and can be recylced and reused for up to 18 months. Benefits of this include cost savings from a reduction in the volume of cleaning solvent purchased and lower disposal costs.

Reduce Cleaning Down Time

Purasolve Paint Equipment Cleaner is designed for ease of paint clean-up and allows thorough cleaning, without having to disassemble the equipment. This helps reduce labour costs and down-time usually associated with paint clean-up.

Extends Equipment Life

Because Purasolve Paint Equipment Cleaner is slow evaporating it thoroughly cleans and removes all paint residue from paint equipment, instead of evaporating quickly and leaving behind deposits that cause congestion, impair painting applications and damage equipment.  This product further extends equipment life as it does not dry out seals and hoses like traditional cleaners.

Reduce Disposal Costs

Significantly reduce hazardous waste disposal costs by recycling and re-using Purasolve Paint Equipment Cleaner for up to 18 months.

No Special Storage Requirements

Purasolve Paint Equipment Cleaner has no Hazchem rating so it needs no special storage areas, lowering the cost of transport, handling and storage.

Improves Lives

Health, Safety and Environmental Benefits      

Safe for You and Your Workers

Purasolve Paint Equipment Cleaner is free of harmful and unhealthy chemicals and you are not exposing users to health and safety risks and future litigation claims.  It also contains no offensive odours, providing more pleasant working environments.


Purasolve Paint Equipment Cleaner is non dangerous and non explosive providing improved user safety.  It also eliminates handling and use risks that are associated with hazardous solvents.

Safe for the Environment

Purasolve Paint Equipment Cleaner has a low toxicity to our eco-systems, along with low VOC emissions.
It is an environmentally responsible safety solvent that helps protect the ozone layer.

Reduced Carbon Footprint

Purasolve Paint Equipment Cleaner has very low VOC (Volatile Organic Compound) emissions and less hazardous waste for disposal

Application is Easy

Purasolve Paint Equipment Cleaner is formulated for through cleaning, without having to disassemble the equipment.

Improves Innovation

Enables New Applications

Slow Evaporation

Because Purasolve Paint Equipment Cleaner has an extremely slow evaporation rate and low VOC emissions it is ideal for outside use.

Accreditations & Testimonials

Accreditation & Reports

Good Environmental Choice Australia (GECA) Accreditation   download certificate

Haztek Risk Assessment    download report

Product SDS Comparison Chart    download report


The elimination of MEK has demonstrated cost savings of nearly $15,000 annually. Hazardous waste generation has decreased by almost 60%.          Pump and Valve Manufacturer

The volume of hazardous waste disposed is reduced by greater than 85%.          Panel Repair Shop

Our painters discovered that the Purasolve Paint Equipment Cleaner was even more effective in the cleaning of the orifices of the gun heads. The most radical change that the painters experienced was the ability to clean the guns and cups in an open tank, without breathing the unpleasant fumes of the MEK.        Aircraft Painting Facility


There are no reviews yet.

Be the first to review “Purasolve Paint Equipment Cleaner”

Your email address will not be published. Required fields are marked *

All Variations

ImageNameSKUSizeQuantityAdd to CartEnquiry **
Purasolve Paint Equipment CleanerPurasolve Paint Equipment Cleaner – 20 LESPEC-2020 L
Purasolve Paint Equipment Cleaner 200LPurasolve Paint Equipment Cleaner – 200 LESPEC-200200 L

Related Products