ActiveEco HP Disinfectant

SKU: AEHP Categories: ,

Hydrogen Peroxide-Based Disinfectant

ActiveEco HP Disinfectant is a hydrogen peroxide-based disinfectant used for decontaminating infectious surfaces and environments. Its unique formulation enables deep penetration into porous surfaces and a powerful surface disinfection and anti-microbial action.

When used to remove mould, ActiveEco HP Disinfectant does not encapsulate or hide mould but destroys the spores and growth to eliminate the mould. It also removes the mould stain and brightens the surface being treated.

  1. Ultimate disinfection power
  2. Biodegradable
  3. Removes stains
  4. Unique powerful formula
  5. Destroys odours
  6. Eliminates mould
Clear
Clear

Benefits

Benefits

  • Ultimate Sanitisation – ActiveEco HP Disinfectant is an anti-microbial formula which has been combined with super-wetting technology to provide an intense deep clean. The technology allows the biocide to penetrate deeper into the inner structure of fibres and porous substrates to remove the source of the contamination.
  • Biodegradable – an environmentally responsible purchasing choice.
  • Removes Stains – a deep cleaning action that lifts mould stains and bacterial discolouration.
  • Unique Powerful Formula – ActiveEco HP Disinfectant is designed with a unique peroxide-based formula for extraordinary disinfection and mould eradication performance – whilst keeping the product in a low toxic and easy to use form.
  • Eliminates Mould – ActiveEco HP Disinfectant lifts mould from surface pores and destroys spores.

Application

For sanitising surfaces: Dilute 1:1.

  1. Pre-clean surfaces of any wet or dry debris.
  2. Apply ActiveEco HP Disinfectant to the affected area ensuring all surfaces come into contact with the disinfectant. Apply via a spray, wet fog, mop, or cloth.
  3. Where possible, agitate briefly to boost penetration into porous substrates. Agitation will significantly help with stain removal.
  4. Allow at least 1-minute surface dwell time for disinfection.
  5. Rinse thoroughly with clean water.

For mould removal: Use neat.

  1. Pre-clean surfaces of any wet or dry debris.
  2. Apply ActiveEco HP Disinfectant to the affected area ensuring all surfaces come into contact with the disinfectant. Apply via a spray, wet fog, mop, or cloth.
  3. Where possible, agitate briefly to boost penetration into porous substrates. Agitation will significantly help with mould removal.
  4. Allow at least 10 minutes dwell time for mould removal.
  5. Rinse thoroughly with clean water.
  6. Repeating this process may be required for removing heavy mould or mould stains.

PRECAUTION:

Always pre-test in an inconspicuous location to ensure no substrate sensitivity. ActiveEco HP Disinfectant is safe for use on most carpets and fabrics; however, some delicate or pre-damaged fibres could be damaged by the product. Observe all safety directions and read the SDS before use.

Reviews

There are no reviews yet.

Be the first to review “ActiveEco HP Disinfectant”

Your email address will not be published. Required fields are marked *

ActiveEco HP Disinfectant SDS

All Variations

ImageNameSKUSizeQuantityAdd to CartEnquiry **
ActiveEco HP Disinfectant – 5 LAEHP-55 L
ActiveEco HP Disinfectant – 20 LAEHP-2020 L
preloader