ActiveEco Rejuvenator

Applications

ActiveEco Rejuvenator can be used for:

• Maintaining flooring surfaces in high soiling, high traffic areas
• Aquatic centres
• Shopping centres
• Conference centres
• Any hard floor requiring effective, fast and regular maintenance

Standard Dilution Rates:

Remove years of deposits and staining by diluting the product 1:10 to 1:20. For maintenance cleaning, dilute 1:50 to 1:100.

Maintenance Clean:

Equipment: Rotary Scrubber + ActiveEco Pad (possibly autoscrubber) and Mop bucket

1. Prepare a 1:20 Solution of ActiveEco Rejuvenator in mop bucket (10 litres water + ½ litre ActiveEco Rejuventaor). Apply this solution to the floor area with a mop. Ensure that the entire area is thoroughly wetted.

2. Do not scrub. Allow 10 minutes dwell time. Ensure that the floor does not dry out during this time.

3. Scrub the area using the rotary scrubber fitted with a ActiveEco Floor Pad. Use the higher speed setting if available (aprox 250rpm). Ensure the floor does not dry out during this step. Have fresh solution on hand to re-wet floor ahead of the scrubbing machine if required. The cleaning efficacy relies on the ActiveEco Floor Pad’s cleaning action on the tiled floor – do not rush through this step.

4. Extract the resultant slurry using an autoscrubber, wet vacuum or if possible hose down drain. Extract within 5 minutes to prevent soiling resettling into the grout lines.

5. Thoroughly rinse the area with clean water.

Note: Where deep grout lines and sloping flooring exists, the technician must ensure that the floor area stays wet with solution during the dwell time and when scrubbing.

Deep Clean Method

Equipment: Rotary Scrubber + ActiveEco Floor Pad and Mop bucket

1. Prepare a 1:5 Solution of ActiveEco Rejuvenator in mop bucket (8 litres water + 2 litres ActiveEco Rejuvenator). Apply this solution to the floor area with a mop. Ensure that the entire area is thoroughly wetted.

2. Do not scrub. Allow 15 minutes dwell time. Ensure that the floor does not dry out during this time.

3. Scrub the area using the rotary scrubber fitted with a ActiveEco Floor Pad. Use the higher speed setting if available (aprox 250rpm). Ensure the floor does not dry out during this step. Have fresh solution on hand to re-wet floor ahead of the scrubbing machine if required. The cleaning efficacy relies on the ActiveEco Floor Pad’s cleaning action on the tiled floor – do not rush through this step.

4. Extract the resultant slurry using an autoscrubber, wet vacuum or if possible hose down drain. Extract within 5 minutes to prevent soiling resettling into the grout lines.

5. Thoroughly rinse the area with clean water.

Note: Where deep grout lines and sloping flooring exists, the technician must ensure that the floor area stays wet with solution during the dwell time and when scrubbing.

Note: Avoid rinsing solution into pool overflow drains.

SPECIAL NOTES:

Maintenance cleaning
Maintenance cleaning should be conducted on a weekly basis. This should allow the operator to only use the alkaline product for maintenance cleans. Due to the nature of the soiling, maintenance cleaning will become increasingly difficult if the period between maintenance cleans is extended.

Sloping Floors
In areas alongside the pools, the floors are sloping. This results in the cleaning solution quickly draining away and presents a challenge to facilitate the required dwell time. Re-moping these areas may be required to keep the floor shiny wet.

Dwell Time
Dwell time is critical to the success of the cleaning operation. It should not be omitted or shortened.

Deep Grout Lines
In many areas the grout lines have been eroded through the use of harsh chemistry and high pressure water cleaning. This will shorten the life span of any floor maintenance pad including the ActiveEco Floor Pad.