ActiveEco Concrete Wash

ActiveEco Concrete Wash is a deep penetrating cleaner specifically formulated to safely remove a variety of organic and non-organic soiling including mildew, rust stains, mineral deposits, calcification, grease & dirt from all masonry surfaces. It buffs the surface making it the perfect choice of cleaner before applying a surface sealer.
Safety: Corrosive Pack Size: 5Lt, 15Lt

Radical Cleaning Strength – High caustic content provides powerful deep cleaning of concrete and other resilient surfaces.
Penetration – A high-tech chemical formulation provides top cleaning performance on a wide spectrum of soil types.
Wide Spectrum – ActiveEco Concrete Wash & Buffer works with special distinction on oily and greasy soils, carbon build-ups and organic soiling. Also removes rust stains, calcification, grime and dirt.
Low Acid: Safer Use – the low-acid formulation provides deeper penetration and more thorough clean even though it is not as acidic as many similar products on the market, making it safer to use.
Ultra-Concentrate – Highly concentrated – highly economical dilution ratios.


Where to Use

Perfect for cleaning pool surrounds, workshop and food processing floors, high volume walkways, monuments, streetscapes and outdoor areas.
ActiveEco Concrete Wash & Buffer removes a variety of organic and non-organic soiling including mildew, rust stains, mineral deposits, calcification, grease & dirt.

Do not allow ActiveEco Concrete Wash & Buffer to contact any hard or soft surface not being treated.
Always pre-test in an inconspicuous location for any substrate sensitivity to chemicals.
ActiveEco Concrete Wash & Buffer will mark and/or etch most natural stones and non-ferrous metals. Do not use on gloss surfaces.
Fumes can cause rusting on ferrous metals.

How to Use

For Professional Use Only – ActiveEco Concrete Wash is not to be handled by any person not trained in its safe and correct use.
ActiveEco Concrete Wash is corrosive and appropriate care should be exercised including the use of suitable protective gloves, goggles and protective clothing and warning signage.
Read and understand the MSDS before use.
Always pre-test in an inconspicuous location for sensitivity to chemicals.

1. Dilute 1 part ActiveEco Concrete Wash with 15 parts water.
2. Apply solution with a brush or sponge. Work from the bottom to the top on vertical surfaces.
3. Allow 10 -20minutes reaction time.
4. Agitate stubborn deposits.
5. Rinse thoroughly with clean water
We recommend using Triple7 Heavy Duty for follow up maintenance cleaning; however ActiveEco Concrete Wash can be diluted to 1:100 for maintenance cleaning if preferred.


There are no reviews yet.

Be the first to review “ActiveEco Concrete Wash”

Your email address will not be published. Required fields are marked *

All Variations

ImageNameSKUSizeQuantityAdd to CartEnquiry **
ActiveEco Concrete Wash – 15 LAECW-1515 L
ActiveEco Concrete Wash – 5 LAECW-55 L

Related Products